ANTI-SPILL AND ABSORBENTS
Cleaning cart made of different anti-spill products, which can be placed near the most sensitive spots of the system due to its structure it is meant to be handy: just like the fire extinguisher placed in the thermal power station!
It is available in various arrays, depending on the location and the needs, it is a high-visibility cart equipped with specific anti-spill and rapid absorption products to protect the workplace from oil leaks. The cart makes it possible to intervene promptly, guaranteeing the working safety by limiting the leak.
Technical features
• Weight: kg 29,3
• Dimensions: cm 58x45x h 124
Cleaner is an absorbent product for floors of oils, aqueous solutions, various liquids. It is completely natural, easy to apply and to dispose of; it leaves the treated surface clean and dry. Since it is granular, it is not removed by the wind, it can be walked on since it doesn’t stick to the soles. It can be used both indoor and outdoor. It is the most valid ecological solution as an alternative to the use of obsolete substances, such as sawdust.
Technical features
- Volume: 18 litres
- Dimensions: cm 41x30x h 28
- Fireproof
- Non-toxic
- It can be walked on (it doesn’t stick to the soles)
- Composed of microgranules
- It isn’t volatile
Used by the Navy, Water Cleaner is an absorbent powder used to separate oils and hydrocarbons from water. It acts quickly and completely fulfilling its dual function, oleophilic and hydrophobic, providing a great help in solving the serious problem of spillage. It is able to absorb and incorporate a quantity of hydrocarbons 7 ÷ 8 times higher than its weight.
Its peculiarity is due to the ability to completely absorb and separate the substances from the water, leaving the last one completely clear.
It can be used in case of pollution of: groundwater, manholes, water holding tanks.
Technical features
- Volume: 5 litres
- Weight: kg 0,9
- Dimensions: cm 24x23x h 20
It is a highly effective unlocking aerosol for extremely oxidized and seized parts. It also performs a good lubricating action protecting against humidity and corrosion. It complies with the USA WP 216 B standard as a penetrating oil to release metal parts.
It is suitable for removing any carbon residue ranging from the levels of the expansion tanks, to the stains on valves or burners, it doesn’t contain carcinogenic products, vegetable, 100% biodegradable, it smells nice.
Spray Carbon Residue removes immediately and deeply the gummy and carbonaceous sediments, oil, greasy and dirt that settle in the glass levelling rods of the expansion tanks, or around flanges, valves, burners, etc. It doesn’t damage catalytic converters. It dries quickly and leaves no residues.
Technical features
• Case of n. 3 barriers each 1 metre long.
• Absorbing power 5 liters each.
• Dimensions: 1 sack kg 0,9.
Absorbing barrier that combines the high absorbency of diatomite with the retentivity of a special woven polyester sock. It is positioned around the machinery, to prevent leakage or spillage, it avoids polluting products from accidentally entering the drainage system around a drain pit. It is also used to stem large oil spills.
Technical features
- Case of n. 3 barriers each 1 metre long
- Absorbing power 5 liters each.
- Dimensions: 1 sack kg 0,9
Cleaner Roll is a roll of absorbent sheets in polypropylene perforated for tearing them in cloths with a diameter of 260 mm and an height of 46 cm. The sheets are effective both for the absorption of aqueous solutions and oily solutions, they are able to hold up to 450 ml of liquids.
Dimensions: 42cm x 46 cm, length of 24,4 mt.
Technical features
• Weight: kg 3
• Dimensions: h: 42 cm
Effective in absorbing battery acid spills, this product changes colour from yellow to blue once it reaches the maximum absorption, and then it can be handled safely by the workers.
